High temperature and high pressure globe valve SS-6N12MM-G opening and closing parts are plug shaped valve, sealing surface flat or cone, the valve along the centerline of the fluid in a straight line. Stem form of exercise, with lifting rod (stem down, the hand wheel does not lift), but also lift rotating rod (hand wheel and rotate with the stem down, the nut is located on the

Detailed information of high temperature and high pressure cut-off valve SS-6N12MM-G imitation of the needle valve

Brand: SY type: SS-6NBSW8T-G, SS-6N12MM-G/6000PSI connection: thread, welding, the card sets

Material: stainless steel, nominal diameter: 6~20 (mm) medium: all kinds of high chemical corrosion medium

Pressure environment: 6000PSI working temperature: high temperature standard: GB

Appearance: micro flow direction: two-way drive mode: Manual

Parts and accessories: hand wheel forms: needle type (channel two): Formula

1 Advanced spherical hydrostatic seal

The stem tip of hard alloy ball valve installation (WCrCo), hard alloy ball three-dimensional direction 360 °

Arbitrary rotation. The valve is closed, spherical hydrostatic seal is used between the hard alloy ball and the valve.

2 section type valve structure, easy operation

Stem with two type structure, in the valve stem seal parts operation along the axis translation, operation time feel relaxed.

3 material and reasonable, precision machining, good tightness

Valve main materials are imported materials (3160Cr17Ni12Mo2Ti), all processing are used CNC precision machining, the grinding of valve sealing parts, small thermal deformation, light touch. Ordering telephone: 13801417548